Sliding wardrobe doors are the most popular type of closet systems in the world. These doors offer greater versatility than hinged doors because they can be installed on a variety of tracks. Sliding doors consist of two panels – one panel is the stationary panel and the other is the sliding panel. The two panels are connected by wood or aluminum track. If you’re planning to install sliding wardrobe doors, it’s important that you measure your track correctly, so that you can have a better idea of how much space you need to install the track, where to position it and how large you should make the track.
You should also determine whether your sliding wardrobe doors will be top-mount or side-mount. Top-mount sliding doors rest on top of the track while side-mount sliding doors rest on each side of the track. This usually depends on the size of your closet and available floor space. You may choose to have both types in order to gain more variety in your closet design.
Sliding wardrobe doors are a great way to save space in your bedroom or in any room in your house. They’re also easy to install and remove. However, you should pay attention to the measurements when installing a sliding wardrobe door. You will need to take into account the size of the door you will be replacing and the size of the space where you plan on installing it. If you want to install a sliding wardrobe door, there are some things you should know before making any purchases.
To make sure your new sliding wardrobe door fits perfectly, measure its dimensions as well as those of the opening for which you plan on installing it before making a purchase. It is important that both measurements have equal widths and lengths. Also, make sure that both doors have the same height so they will open and close properly.
Measuring for a sliding door wardrobe is the same process as measuring for any other wardrobe. The difference comes with the measurements themselves. For a sliding door wardrobe you need two measurements, the distance between the tracks and the distance between the wall and the back of the wardrobe. This is because a sliding door wardrobe has tracks to allow it to slide in and out of its space.
The best way made to measure doors wardrobe is to locate the tracks first. This will be where your sliding door will be running along them. Measure this width and depth onto your wall, either by using a tape measure or by drawing along a pencil mark on your wall (this may mean you have to remove any picture frames).
Next you need to measure your desired opening size. For a 3 panel sliding door this will be how wide you want your opening to be from left to right (the hinged side) and how high at the tallest point you want it. You can then use these measurements with our online sliding wardrobes configurator to see what sizes of wardrobes will fit into your space.
